1 of 10 optimum technology matching? applied gaas hbt ingap hbt gaas mesfet sige bicmos si bicmos sige hbt gaas phemt si cmos si bjt gan hemt functional block diagram rf micro devices?, rfmd?, optimum technology matching?, enabling wireless connectivity?, powerstar?, polaris? total radio? and ultimateblue? are trademarks of rfmd, llc. bluetooth is a trade- mark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks and registered tradem arks are the property of their respective owners. ?2006, rf micro devices, inc. product description 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. rf mems ldmos vcc1 ip in gnd nc gnd vcc2 gnd gnd gnd lop lon nc nc qn gnd 1 -45 +45 ` 2 3 4 5 6 gnd nc 19 20 21 22 23 24 18 17 16 15 14 13 rfout gnd gnd nc 12 11 10 9 8 7 gnd qp rfmd2014 direct quadrature modulator the rfmd2014 is direct quadrature modulator for use in cellular base stations and other communications systems. rfmd2014 supports cellu- lar, 3g, wimax, and lte air interface st andards. this device features oper- ation from 1700mhz to 2700mhz with excellent carrier and sideband suppression and ultra low noise floor. the device is manufactured in an advanced gaas hbt process. the rf md2014 operates from a single 5v supply and is packaged in a low co st, 4mm x 4mm, 24-pin leadless pack- age. features ? acpr performance: -70dbc typ. for 1-carrier wcdma ? very high linearity: +26dbm oip3 ? very low noise floor: -160dbm/hz ? high output power: +11dbm p1db ? typical carrier feed-through: <-40dbm ? single-ended or differential lo drive ? typical sideband suppression: <-40dbc ? single +5v supply ? small 24-pin, 4mmx4mm, qfn applications ? cellular, 3g infrastructure ? wibro, wimax, lte ? wlan or wll systems ? gmsk, qpsk, dqpsk, qam modulation ds100115 ? package: qfn, 24-pin, 4mm x 4mm rfmd2014 direct quadra- ture modulator
2 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. absolute maximum ratings parameter rating unit supply voltage 5.5 v lo input +10 dbm operating temperature -40 to +85 c storage temperature -65 to +150 c maximum junction temperature +150 c power dissipation 1200 mw bb cm voltage 1.8 v thermal resistance 28 c/w esd class 1 c (1000v) parameter specification unit condition min. typ. max. general supply voltage 4.75 5 5.25 v supply current 189 210 231 ma rf output rf frequency range 1700 2700 mhz carrier feed through -40 dbm uncalibrated sideband suppression -40 db uncalibrated oip3 23 26 dbm baseband input 800mv pp , 20khz rf port return loss 15 db p out -3 0 3 dbm baseband input 800mv pp, cw quadrature acp -70 dbc rf output -10dbm, 1 carrier wcdma broadband noise floor -160 dbm/hz 20mhz offset, bb ov pp output power flatness 0.25 db over 60mhz bw p1db 9 11 dbm lo input lo frequency range 1700 2700 mhz lo input power -3 0 3 dbm return loss 15 db bb input i/q input frequency range dc 300 mhz bb input impedance 600 differential impedance common mode voltage 1.5 v note: typical performance at nominal conditions unless otherwise noted: vcc=+5v, temperature=+25c, baseband cm voltage=+1.5v, lo frequency=2100mhz, lo power=0dbm, single-ended caution! esd sensitive device. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical perfor- mance or functional operation of the devi ce under absolute maximum rating condi- tions is not implied. rohs status based on eudirective2002/95/ec (at time of this document revision). the information in this publication is believed to be accurate and reliable. however, no responsibility is assumed by rf micro devices, inc. ("rfmd") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.
3 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. pin function description 1nc no connection. 2gnd rf/dc ground connection. 3lop local oscillator di fferential input. 4lon local oscillator differential input. connect to ground when using lop input in single ended mode. 5gnd rf/dc ground connection. 6nc no connection. 7nc no connection. 8gnd rf/dc ground connection. 9qn q channel differential baseband input. 10 qp q channel differential baseband input. 11 gnd rf/dc ground connection. 12 gnd rf/dc ground connection. 13 nc no connection. 14 gnd rf/dc ground connection. 15 nc no connection. 16 rfout rf single-ended output. 17 gnd rf/dc ground connection. 18 vcc2 5v supply. 19 gnd rf/dc ground connection. 20 gnd rf/dc ground connection. 21 ip i channel differential baseband input. 22 in i channel differential baseband input. 23 gnd rf/dc ground connection. 24 vcc1 5v supply.
4 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 1400 1600 1800 2000 2200 2400 2600 2800 output power (dbm) lo freq (mhz) cw output power vs lo frequency vcc 5v, lo 0dbm, iq drive 0.4vppse, iq bias 1.5v cw output power +25c cw output power -40c cw output power +85c -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 1400 1600 1800 2000 2200 2400 2600 2800 lo feedthru (dbm) lo freq (mhz) carrier feedthru vs lo frequency vcc 5v, lo 0dbm, iq drive 0.4vppse, iq bias 1.5v carrier feedthrough +25c carrier feedthrough -40c carrier feedthrough +85c -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 1400 1600 1800 2000 2200 2400 2600 2800 suppression (dbc) lo freq (mhz) sideband suppression vs lo frequency vcc 5v, lo 0dbm, iq drive 0.4vppse, iq bias 1.5v sideband suppression +25c sideband suppression -40c sideband suppression +85c 0 5 10 15 20 25 30 1400 1600 1800 2000 2200 2400 2600 2800 output ip3 (dbm) lo freq (mhz) output ip3 vs lo frequency vcc 5v, lo 0dbm, iq drive 0.4vppse, iq bias 1.5v oip3 +25c oip3 -40c oip3 +85c -15 -14 -13 -12 -11 -10 -80 -75 -70 -65 -60 -55 1400 1600 1800 2000 2200 2400 2600 2800 c h a n n e l p o w e r ( d b m ) acp and alt1 (dbc) lo freq (mhz) wcdma channel power / adjacent chan pwr / alt chan pwr vcc 5v, lo 0dbm, iq drive 0.4vppse, iq bias 1.5v acp wcdma channel power -25 -20 -15 -10 -5 0 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 return loss (db) freq (ghz) rf port return loss vcc 5v, lo 0dbm rf port +25c rf port -40c rf port +85c
5 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. -3 -2 -1 0 1 2 3 4 -10 -5 0 5 10 15 gain (db) output power (dbm) cw gain compression vs output power vcc 5v, lo 2100mhz 0dbm, iq bias 1.5v gain compression +25c gain compression -40c gain compression +85c -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 lo feedthru (dbm) iq drive (vpp se) carrier feedthrough vs iq drive vcc 5v, lo 2100mhz 0dbm, iq bias 1.5v carrier feedthrough +25c carrier feedthrough -40c carrier feedthrough +85c -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 suppression (dbc) iq drive (vpp se) sideband suppression vs iq drive vcc 5v, lo 2100mhz 0dbm, iq bias 1.5v sideband suppression +25c sideband suppression -40c sideband suppression +85c -35 -30 -25 -20 -15 -10 -5 0 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 return loss (db) freq (mhz) lo port return loss vcc 5v, lo 0dbm lo port +25c lo port -40c lo port +85c -80 -75 -70 -65 -60 -55 -50 -45 -40 -35 -30 -20 -15 -10 -5 0 5 10 acp (dbc) channel power (dbm) wcdma adjacent chan pwr vs channel power vcc 5v, lo 2100mhz 0dbm, iq bias 1.5v acp +25c acp -40c acp +85c -165 -160 -155 -150 -145 -140 -20 -15 -10 -5 0 5 10 output noise (dbm/hz) channel power (dbm) output noise floor vs channel power vcc 5v, lo 2140mhz 0dbm, iq bias 1.5v, wcdma noise floor +25c noise floor -40c noise floor +85c
6 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -6 -4 -2 0 2 4 6 suppression (dbc) lo power (dbm) sideband suppression vs lo power vcc 5v, lo 2100mhz, iq drive 0.4vpp se, iq bias 1.5v sideband suppression +25c sideband suppression -40c sideband suppression +85c -80 -75 -70 -65 -60 -55 -6 -4 -2 0 2 4 6 acp (dbc) lo power (dbm) adjacent chan pwr vs lo power vcc 5v, lo 2100mhz, iq drive 0.4vpp se, iq bias 1.5v acp +25c acp -40c acp +85c -165 -160 -155 -150 -145 -140 -6-4-20246 output noise (dbm/hz) lo power (dbm) output noise floor vs lo power vcc 5v, lo 2140mhz, iq drive 0.4vpp se, iq bias 1.5v, wcdma noise floor +25c noise floor -40c noise floor +85c 0 5 10 15 20 25 30 -6 -4 -2 0 2 4 6 output ip3 (dbm) lo power (dbm) output ip3 vs lo power vcc 5v, lo 2100mhz, iq drive 0.4vpp se, iq bias 1.5v oip3 +25c oip3 -40c oip3 +85c 0 5 10 15 20 25 30 4.4 4.6 4.8 5 5.2 5.4 5.6 output ip3 (dbm) vcc (v) output ip3 vs vcc lo 2100mhz 0dbm, iq bias 1.5v, iq drive 0.4vpp se oip3 +25c oip 3 -40c oip3 +85c -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 4.4 4.6 4.8 5 5.2 5.4 5.6 lo feedthru (dbm) vcc (v) carrier feedthrough vs vcc lo 2100mhz 0dbm, iq bias 1.5v, iq drive 0.4vpp se carrier feedthrough +25c carrier feedthrough -40c carrier feedthrough +85c
7 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. -80 -75 -70 -65 -60 -55 4.4 4.6 4.8 5 5.2 5.4 5.6 acp (dbc) vcc (v) wcdma adjacent chan pwr vs vcc lo 2100mhz 0dbm, iq bias 1.5v, iq drive 0.4vpp se acp +25c acp -40c acp +85c -165 -160 -155 -150 -145 -140 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 output noise (dbm/hz) vcc (v) output noise floor vs vcc lo 2140mhz 0dbm, iq bias 1.5v, iq drive 0vpp se noise floor +25c noise floor -40c noise floor +85c -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 4.4 4.6 4.8 5 5.2 5.4 5.6 suppression (dbc) vcc (v) sideband suppression vs vcc lo 2100mhz 0dbm, iq bias 1.5v, iq drive 0.4vpp se sideband suppression +25c sideband suppression -40c sideband suppression +85c
8 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board schematic note: evaluation board configured for single-ended lo drive us ing lop connector. terminate the lon pin to ground near the package. 50 strip c1 100 pf c5 100 pf j6 in j7 ip j4 qp 50 strip j1 lop c7 12pf c8 2.2pf j5 rf out vcc1 ip in gnd nc gnd vcc2 gnd gnd gnd lop lon nc nc qn gnd 1 -45 +45 2 3 4 5 6 gnd nc 19 20 21 22 23 24 18 17 16 15 14 13 rfout gnd gnd nc 12 11 10 9 8 7 gnd qp c9 dni 50 strip j2 lon j3 qn c6 1000 pf c2 1000 pf c3 4.7 uf c4 4.7 uf r3 0 r1 0 vcc1 vcc2 r2 0 l1 5.6nh
9 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. evaluation board layout
10 of 10 rfmd2014 ds100115 7628 thorndike road, greensboro, nc 27409-9421 for sales or technical support, contact rfmd at (+1) 336-678-5570 or sales-support@rfmd.com. package drawing qfn, 24-pin, 4mm x 4mm branding diagram ordering information ordering code description rfmd2014sq sample bag with 25 pieces RFMD2014SR 7" reel with 100 pieces rfmd2014tr7 7" reel with 1500 pieces rfmd2014tr13 13" reel with 2500 pieces rfmd2014pck-410 1700mhz to 2700mhz pcba with 5-piece sample bag md2014-u01 date code trace code
|
